Professor.E "Forgotten Materials" Conjoined Cow Leather Belt
Made in China
- Removable brass buckle
- The belt has been skived seamlessly, cemented & hand stitched to join the full grain side with the reverse side of the leather
- 3mm cow leather
check measurements
Condition: 8.5/10
Like new condition, natural blemishes & scarring throughout
Couldn't load pickup availability
About the Brand
About the Brand
Professor.E blends historical craftsmanship with contemporary design. Founded in 2017 by Ken Rao, the brand draws inspiration from the collision of old and new, East and West. Each piece features innovative construction techniques paired with traditional tailoring sensibilities—deconstructed jackets, lightweight linens, relaxed trousers, and minimalist essentials in thoughtfully sourced textiles and earthy tones. Rooted in daily observation and cultural dialogue, Professor.E creates garments that honour heritage while embracing modern innovation.
Measurements
Measurements
(Flat)
Leather Length: 129 cm
Leather Width: 2.3 cm
Leather Thickness: 0.3 cm
Buckle to the First Hole: 87.3 cm
Buckle to the Last Hole: 102.5 cm
Measurement Guide
Measurement Guide
Every piece is measured by hand, laid flat, in centimetres. Each listing carries its own figures under Measurements. The diagrams below show where each figure is taken.
How we measure
- Pieces are laid flat and smoothed without stretching.
- Figures across the body cover one side only. Double Pit to Pit, Waist, Thigh and Leg Opening for the full circumference.
- Archival sizing differs between designers, seasons and countries. A tagged JP 2 or IT 48 tells you less than the figures do.
- Hand measurements of worn garments can vary slightly. Allow a small margin of error.
Finding your fit
- Choose a piece you own that fits the way you want.
- Lay it flat on a hard surface and smooth it out without stretching.
- Measure it at the points shown below.
- Compare your figures with the listing.
Tops and Outerwear
-
1
Shoulder
Straight across, from one shoulder seam to the other.
-
2
Pit to Pit
Straight across the chest. Double it for the full chest.
-
3
Sleeve Length
From the shoulder seam to the end of the cuff, along the top of the sleeve.
-
4
Length
From the bottom of the collar seam at the back, straight down to the hem.
Short-sleeve and sleeveless pieces follow the same points. Jumpsuits and other one-piece garments are listed as a top half and a bottom half, using this diagram and the next. Raglan shoulders without seams are measured using best judgement according to the piece.
Bottoms
-
1
Waist
Straight across the top of the waistband, edge to edge. Double it for the full waist.
-
2
Rise
From the crotch seam or end up to the top of the waistband, along the front.
-
3
Thigh
Straight across one leg, just below the crotch.
-
4
Inseam
From the crotch seam down the inner leg to the hem.
-
5
Leg Opening
Straight across the hem of one leg, edge to edge.
Drop-crotch pieces carry a long rise and a short inseam. Read the two together. Thigh measurements may vary.
Footwear
-
1
Outsole Length
From the back of the heel to the tip of the toe, along the bottom of the sole.
-
2
Heel Height
From the ground to the top of the heel, at the back.
-
3
Upper Height
From the top of the sole to the top edge of the upper's highest point.
-
4
Tongue Height
From the top of the sole to the top of the tongue, at the side.
-
5
Insole Length
Heel to toe along the insole, taken when the insole is removable.
Outsole length is not foot length; welts and toe shapes add to it. Compare against the outsole or insole of a pair that fits you.
Belts
-
1
Leather Length
From the base of the buckle pin, where it meets the leather, to the tip of the strap.
-
2
Leather Width
Straight across the strap, top edge to bottom edge.
-
3
Leather Thickness
The depth of the leather, shown here at the cut end of the strap.
-
4
Buckle to Hole
From the base of the buckle pin to the centre of a hole. This is the waist the belt closes at on that hole. Listings give the first, middle and last holes.
Buckles, crosses and other hardware are measured at their widest points.
Bags
-
1
Length
Side to side across the front.
-
2
Height
Top to bottom, not including handles.
-
3
Width / Depth
Front to back, across the base.
-
4
Handle Drop
From the top edge of the bag to the inside top of the handle, held upright.
Strap Length is taken end to end at full extension.
Accessories
Hats
-
1
Inner Circumference
Around the inside of the headband.
-
2
Width
Straight across, laid flat.
-
3
Length
From the crown to the edge, laid flat.
Gloves
-
1
Length
From the tip of the middle finger to the edge of the cuff.
-
2
Palm Width
Straight across the palm, below the fingers.
-
3
Opening
Straight across the cuff opening, laid flat.
Rings
-
1
Diameter
Across the inside of the band.
-
2
Circumference
Around the outside of the band.
-
3
Height
Top edge to bottom edge of the band.
Bracelets
-
1
Inner Circumference
Around the inside edge.
-
2
Width
Across the band.
Necklaces
-
1
Chain Drop Length
From the top of the chain to the bottom, laid flat and extended straight.
-
2
Pendant Length
The pendant at its tallest point.
-
3
Pendant Width
The pendant at its widest point.
Eyewear
-
1
Lens Width
Across one lens at its widest point.
-
2
Bridge Width
The gap between the lenses.
-
3
Temple Length
From the hinge to the tip of the arm.
Scarves, ties and other flat pieces are measured for length and width, laid flat. Hardware, pendants and ornaments are measured at their widest points.
Questions about a specific piece? Email support@driewgarments.com with the piece and your own measurements.
To try pieces in person, book a showroom appointment.
Material
Material
Main: Cow Leather 100%
Buckle: Brass 100%
Care Guide
Care Guide
Special Leather Treatment
Share
