Skip to product information
1 of 15

MiharaYasuhiro Early 00s Reverse Pigskin Leather Derbies

Mihara Yasuhiro

Made in Japan

  • Blake stitch construction
  • Dust pink / white reverse pig leather uppers
  • Roughout leather feels stiff while the smooth inner side feels soft
  • White leather laces
  • Leather insole
  • Leather lined heel counter
  • Thin & low profile leather outsole & short stacked leather heel

fits up to a 9.5 US

Condition: 7/10

Some mould spots on the uppers from storage, minor heel drag, general dirt, wear & patina throughout the uppers, general wear on the outsole, the lining, heel counter & footbed remain in great condition

Sale Sold out
Shipping calculated at checkout.
Size

About the Brand

Mihara Yasuhiro, a renowned Japanese fashion designer, founded his eponymous label in 1998, initially focusing on footwear. His design philosophy combines traditional craftsmanship with innovative materials, resulting in avant-garde, streetwear-inspired collections. His work often blurs the boundaries between fashion and art, making it highly sought after by fashion enthusiasts worldwide. His lasting impact on Japanese fashion stems from his ability to continuously reinvent his style while remaining true to his origins, reflecting the ever-changing and diverse nature of the Japanese fashion industry.

Measurements

(Flat)

Outsole Length: 30 cm
Heel Height: 1.5 cm
Upper Height: 10 cm

Measurement Guide

Every piece is measured by hand, laid flat, in centimetres. Each listing carries its own figures under Measurements. The diagrams below show where each figure is taken.

How we measure

  • Pieces are laid flat and smoothed without stretching.
  • Figures across the body cover one side only. Double Pit to Pit, Waist, Thigh and Leg Opening for the full circumference.
  • Archival sizing differs between designers, seasons and countries. A tagged JP 2 or IT 48 tells you less than the figures do.
  • Hand measurements of worn garments can vary slightly. Allow a small margin of error.

Finding your fit

  1. Choose a piece you own that fits the way you want.
  2. Lay it flat on a hard surface and smooth it out without stretching.
  3. Measure it at the points shown below.
  4. Compare your figures with the listing.
01

Tops and Outerwear

1 2 3 4
  1. 1
    Shoulder

    Straight across, from one shoulder seam to the other.

  2. 2
    Pit to Pit

    Straight across the chest. Double it for the full chest.

  3. 3
    Sleeve Length

    From the shoulder seam to the end of the cuff, along the top of the sleeve.

  4. 4
    Length

    From the bottom of the collar seam at the back, straight down to the hem.

Short-sleeve and sleeveless pieces follow the same points. Jumpsuits and other one-piece garments are listed as a top half and a bottom half, using this diagram and the next. Raglan shoulders without seams are measured using best judgement according to the piece.

02

Bottoms

1 2 3 4 5
  1. 1
    Waist

    Straight across the top of the waistband, edge to edge. Double it for the full waist.

  2. 2
    Rise

    From the crotch seam or end up to the top of the waistband, along the front.

  3. 3
    Thigh

    Straight across one leg, just below the crotch.

  4. 4
    Inseam

    From the crotch seam down the inner leg to the hem.

  5. 5
    Leg Opening

    Straight across the hem of one leg, edge to edge.

Drop-crotch pieces carry a long rise and a short inseam. Read the two together. Thigh measurements may vary.

03

Footwear

1 2 3 4 5
  1. 1
    Outsole Length

    From the back of the heel to the tip of the toe, along the bottom of the sole.

  2. 2
    Heel Height

    From the ground to the top of the heel, at the back.

  3. 3
    Upper Height

    From the top of the sole to the top edge of the upper's highest point.

  4. 4
    Tongue Height

    From the top of the sole to the top of the tongue, at the side.

  5. 5
    Insole Length

    Heel to toe along the insole, taken when the insole is removable.

Outsole length is not foot length; welts and toe shapes add to it. Compare against the outsole or insole of a pair that fits you.

04

Belts

1 2 3 4
  1. 1
    Leather Length

    From the base of the buckle pin, where it meets the leather, to the tip of the strap.

  2. 2
    Leather Width

    Straight across the strap, top edge to bottom edge.

  3. 3
    Leather Thickness

    The depth of the leather, shown here at the cut end of the strap.

  4. 4
    Buckle to Hole

    From the base of the buckle pin to the centre of a hole. This is the waist the belt closes at on that hole. Listings give the first, middle and last holes.

Buckles, crosses and other hardware are measured at their widest points.

05

Bags

1 2 3 4
  1. 1
    Length

    Side to side across the front.

  2. 2
    Height

    Top to bottom, not including handles.

  3. 3
    Width / Depth

    Front to back, across the base.

  4. 4
    Handle Drop

    From the top edge of the bag to the inside top of the handle, held upright.

Strap Length is taken end to end at full extension.

06

Accessories

Hats

1 2 3
  1. 1
    Inner Circumference

    Around the inside of the headband.

  2. 2
    Width

    Straight across, laid flat.

  3. 3
    Length

    From the crown to the edge, laid flat.

Gloves

1 2 3
  1. 1
    Length

    From the tip of the middle finger to the edge of the cuff.

  2. 2
    Palm Width

    Straight across the palm, below the fingers.

  3. 3
    Opening

    Straight across the cuff opening, laid flat.

Rings

1 2 3
  1. 1
    Diameter

    Across the inside of the band.

  2. 2
    Circumference

    Around the outside of the band.

  3. 3
    Height

    Top edge to bottom edge of the band.

Bracelets

1 2
  1. 1
    Inner Circumference

    Around the inside edge.

  2. 2
    Width

    Across the band.

Necklaces

1 2 3
  1. 1
    Chain Drop Length

    From the top of the chain to the bottom, laid flat and extended straight.

  2. 2
    Pendant Length

    The pendant at its tallest point.

  3. 3
    Pendant Width

    The pendant at its widest point.

Eyewear

1 2 3
  1. 1
    Lens Width

    Across one lens at its widest point.

  2. 2
    Bridge Width

    The gap between the lenses.

  3. 3
    Temple Length

    From the hinge to the tip of the arm.

Scarves, ties and other flat pieces are measured for length and width, laid flat. Hardware, pendants and ornaments are measured at their widest points.

Questions about a specific piece? Email support@driewgarments.com with the piece and your own measurements.

To try pieces in person, book a showroom appointment.

Material

Pig Leather 100%
Leather Outsole & Stacked Leather Heel
Rubber Heel
Leather Laces

Care Guide

Special Leather Treatment

View full details