Skip to product information
1 of 14

BALMAIN by Olivier Rousteing SS12 Padded Waxed Cotton Rider Jacket

BALMAIN

Made in Japan

  • Oliver’s debut collection at Balmain after worked as assistant former assistant for Decarnin
  • Lightly waxed cotton fabric
  • Double breasted front closure with branded dual zippers and metal snap buttons
  • Can be styled with the panels fully zipped up, or zipped to the side creating an open front
  • Padded shoulders & sleeves
  • Adjustable zipper at the sleeves
  • Adjustable belt & buckle strap at the hem
  • 2 front zipper pockets

 

fits true to size

Condition: 8/10

Light wear throughout, no flaws

Sale Sold out
Shipping calculated at checkout.
Size

About the Brand

Olivier Rousteing took the reins at Balmain in 2011 at just 25, injecting youth, diversity, and digital-era glamour into the heritage house. Known for his opulent, body-conscious silhouettes and celebrity-driven campaigns, he redefined the brand’s image for a new generation. Pre-Rousteing, Balmain under Christophe Decarnin embraced grunge-luxe with military embellishments and distressed denim, reviving the once-struggling label. Before that, Balmain was known for refined Parisian elegance under Pierre Balmain himself. Rousteing’s tenure marked a bold shift—from classic couture to high-octane pop culture, making Balmain a global powerhouse driven by social media and spectacle.

Measurements

(Flat)

Shoulder: 44.5 cm
Pit to Pit: 49 cm
Sleeve Length: 68 cm
Length: 70 cm

Measurement Guide

Every piece is measured by hand, laid flat, in centimetres. Each listing carries its own figures under Measurements. The diagrams below show where each figure is taken.

How we measure

  • Pieces are laid flat and smoothed without stretching.
  • Figures across the body cover one side only. Double Pit to Pit, Waist, Thigh and Leg Opening for the full circumference.
  • Archival sizing differs between designers, seasons and countries. A tagged JP 2 or IT 48 tells you less than the figures do.
  • Hand measurements of worn garments can vary slightly. Allow a small margin of error.

Finding your fit

  1. Choose a piece you own that fits the way you want.
  2. Lay it flat on a hard surface and smooth it out without stretching.
  3. Measure it at the points shown below.
  4. Compare your figures with the listing.
01

Tops and Outerwear

1 2 3 4
  1. 1
    Shoulder

    Straight across, from one shoulder seam to the other.

  2. 2
    Pit to Pit

    Straight across the chest. Double it for the full chest.

  3. 3
    Sleeve Length

    From the shoulder seam to the end of the cuff, along the top of the sleeve.

  4. 4
    Length

    From the bottom of the collar seam at the back, straight down to the hem.

Short-sleeve and sleeveless pieces follow the same points. Jumpsuits and other one-piece garments are listed as a top half and a bottom half, using this diagram and the next. Raglan shoulders without seams are measured using best judgement according to the piece.

02

Bottoms

1 2 3 4 5
  1. 1
    Waist

    Straight across the top of the waistband, edge to edge. Double it for the full waist.

  2. 2
    Rise

    From the crotch seam or end up to the top of the waistband, along the front.

  3. 3
    Thigh

    Straight across one leg, just below the crotch.

  4. 4
    Inseam

    From the crotch seam down the inner leg to the hem.

  5. 5
    Leg Opening

    Straight across the hem of one leg, edge to edge.

Drop-crotch pieces carry a long rise and a short inseam. Read the two together. Thigh measurements may vary.

03

Footwear

1 2 3 4 5
  1. 1
    Outsole Length

    From the back of the heel to the tip of the toe, along the bottom of the sole.

  2. 2
    Heel Height

    From the ground to the top of the heel, at the back.

  3. 3
    Upper Height

    From the top of the sole to the top edge of the upper's highest point.

  4. 4
    Tongue Height

    From the top of the sole to the top of the tongue, at the side.

  5. 5
    Insole Length

    Heel to toe along the insole, taken when the insole is removable.

Outsole length is not foot length; welts and toe shapes add to it. Compare against the outsole or insole of a pair that fits you.

04

Belts

1 2 3 4
  1. 1
    Leather Length

    From the base of the buckle pin, where it meets the leather, to the tip of the strap.

  2. 2
    Leather Width

    Straight across the strap, top edge to bottom edge.

  3. 3
    Leather Thickness

    The depth of the leather, shown here at the cut end of the strap.

  4. 4
    Buckle to Hole

    From the base of the buckle pin to the centre of a hole. This is the waist the belt closes at on that hole. Listings give the first, middle and last holes.

Buckles, crosses and other hardware are measured at their widest points.

05

Bags

1 2 3 4
  1. 1
    Length

    Side to side across the front.

  2. 2
    Height

    Top to bottom, not including handles.

  3. 3
    Width / Depth

    Front to back, across the base.

  4. 4
    Handle Drop

    From the top edge of the bag to the inside top of the handle, held upright.

Strap Length is taken end to end at full extension.

06

Accessories

Hats

1 2 3
  1. 1
    Inner Circumference

    Around the inside of the headband.

  2. 2
    Width

    Straight across, laid flat.

  3. 3
    Length

    From the crown to the edge, laid flat.

Gloves

1 2 3
  1. 1
    Length

    From the tip of the middle finger to the edge of the cuff.

  2. 2
    Palm Width

    Straight across the palm, below the fingers.

  3. 3
    Opening

    Straight across the cuff opening, laid flat.

Rings

1 2 3
  1. 1
    Diameter

    Across the inside of the band.

  2. 2
    Circumference

    Around the outside of the band.

  3. 3
    Height

    Top edge to bottom edge of the band.

Bracelets

1 2
  1. 1
    Inner Circumference

    Around the inside edge.

  2. 2
    Width

    Across the band.

Necklaces

1 2 3
  1. 1
    Chain Drop Length

    From the top of the chain to the bottom, laid flat and extended straight.

  2. 2
    Pendant Length

    The pendant at its tallest point.

  3. 3
    Pendant Width

    The pendant at its widest point.

Eyewear

1 2 3
  1. 1
    Lens Width

    Across one lens at its widest point.

  2. 2
    Bridge Width

    The gap between the lenses.

  3. 3
    Temple Length

    From the hinge to the tip of the arm.

Scarves, ties and other flat pieces are measured for length and width, laid flat. Hardware, pendants and ornaments are measured at their widest points.

Questions about a specific piece? Email support@driewgarments.com with the piece and your own measurements.

To try pieces in person, book a showroom appointment.

Material

Main: Cotton 100%
Body Lining: Cotton 100%
Sleeve Lining: Cupro 100%
Pocket Lining: Cotton 100%
Kilting: Polyester 100%
Custom Hardware

Care Guide

Dry Clean Only

View full details